close
Choose Your Site
Global
Social Media
| Quantity: | |
|---|---|
TS
TS series
1K RTV Thermal Silicone Gel
TS series belongs to dealcoholized one-component room-temperature vulcanized silicone rubber products, which can be vulcanized into elastomer when contacting with moisture in the air at room temperature, and is applied to heat transfer between heating components and radiators, and saves mechanical fastening required by traditional heat conduction methods. Excellent volume resistance, breakdown voltage, power loss, arc resistance, etc., and not easily affected by temperature and frequency changes, and can work for a long time at -55℃~200℃; After vulcanization, it is non-corrosive to metals and can withstand the impact of cold and heat changes.
Product Features
● Easy to use, curing at room temperature in contact with moisture in the air;
● It has good adhesion with most materials, and generally does not need to use primer;
● Excellent weather aging resistance, ultraviolet resistance and ozone resistance;
● Good water resistance, excellent moisture-proof and waterproof performance;
● Excellent high temperature resistance
Typical Applications
Single - component thermal conductive silicone has various applications in different fields. The following is a classified summary:
Heat Dissipation for Electronic Components: It is used to fill the gap between electronic components such as CPUs, GPUs, and power transistors and their heat sinks. This helps to improve heat transfer efficiency, ensuring the components work within a proper temperature range, thus enhancing the stability and lifespan of electronic devices.
Thermal Management in Circuit Boards: Applied to circuit boards to conduct heat away from heat - generating components, preventing overheating of the board and potential damage to electronic elements, which is crucial for the reliable operation of the entire electronic device.
Thermal Conductivity in LED Lighting: In LED lamps and lighting fixtures, it is used to attach the LED chips to the heat - dissipating substrate. By effectively transferring the heat generated by the LEDs, it helps to maintain their luminous efficiency and prolong their service life, as excessive heat can cause color shift and reduced brightness in LEDs.
Heat Dissipation for Optical Modules: For optical communication modules and other optoelectronic devices, this silicone plays a vital role in dissipating heat. It ensures the stable operation of these devices by maintaining appropriate temperatures, which is essential for high - speed and reliable optical signal transmission.
Thermal Management in Motors: Used in motors to dissipate heat from the windings and other heat - generating parts. This helps to improve the efficiency and reliability of the motor, preventing overheating - related failures and extending its service life.
Heat Dissipation in Power Supplies: In power supply units, it is applied to transfer heat from the power - converting components to the heat sink. This ensures the stable operation of the power supply, maintaining its output voltage and current stability, and protecting the internal components from thermal stress.
Heat Dissipation for Car Electronics: Utilized in various automotive electronic components such as car infotainment systems, engine control units (ECUs), and power amplifiers. It helps to dissipate the heat generated during their operation, ensuring their reliable performance under different driving conditions and temperatures.
Thermal Protection for Battery Packs: In electric vehicles, it is used to attach the battery cells to the battery pack's heat - dissipating structure. This helps to maintain a uniform temperature distribution within the battery pack, improving the efficiency and safety of the battery, and prolonging its overall lifespan.
Package and Storage
100ml/ piece, 100 pieces/box; 310ml/ piece, 25 pieces/box; 2600ml/ piece, 4 pieces/box.
storage: keep away from light, heat and seal (it can be transported and stored as non-dangerous goods).
Technical Data Sheet
Test Item | Unit | TS-10 | TS-20 | Test method |
Characteristics before curing (23 ± 2 ℃) 50% ± 5% RH | ||||
Color | / | White paste | Off-white paste | Visual inspection |
Surface drying time | 23 ℃, 50% RH, Min | 15 | 15 | GB/T13477.5-2002 |
Characteristics after curing (23 ± 2 ℃, 50% ± 5% RH, 7 days) | ||||
Appearance | / | White | Off-white | Visual inspection |
Specific gravity | 23℃, g/cm³ | 1.71±0.05 | 2.8±0.05 | ASTM D0792 |
Hardness | Shore A | 70±5 | 65±5 | ASTM D2240 |
Tensile strength | MPa | ≥1.5 | ≥2.0 | ASTM D412 |
Bonding strength | MPa | ≥1.0 | ≥2.0 | ASTM D1002 |
Elongation | % | ≥50 | 150~200 | ASTM D412 |
Thermal conductivity | W/m. K. | ≥1.0 | ≥2.0 | ISO/DIS22007-2.2 |
Volume resistivity | Ω.cm | ≥1× 1014 | ≥3× 1015 | ASTM D257 |
Insulation strength | KV/mm | ≥15 | ≥20 | ASTM D149 |
Dielectric constant | 60 HZ | ≤4.0 | ≤4.0 | ASTM D150 |
Dielectric loss factor | 60 HZ | ≤0.04 | ≤0.04 | ASTM D150 |
Flame retardant rating | / | V0 | V0 | UL94 |
Temperature Resistant | ℃ | -50~250 | -50~250 | - |
ShenZhen DuBang Technology Co., Ltd., our company's main products are thermal conductive silicone sheets, thermal conductive grease, thermal conductive potting glue, thermal conductive gel, thermal conductive insulation sheets, thermal conductive double-sided tape, thermal conductive graphite sheets and other products, which are widely used in automotive electronics, power supplies, LED lighting, network communications, smart devices, and household appliances.
10000 square meters original production base in DongGuan city
20 sets production process and 4 fully automatic production line to help quick lead time
With 100+ manufacturing raw material from oversea country
We have ROHS, UL, ISO 9001, ISO 14001, IATF 16949 certificate.
Exhibition
